Skip to main content

Nailhead Console Table: An entryway table luxe upgrade

Nailhead Console Table - IKEA LACK Entryway Table Luxe Upgrade

The size of the IKEA LACK console table is right for entryways and hallways. But it’s just a bit, how should we say it, meh? It’s certainly not the furniture piece to make an impression and say “hello” to your guests when they arrive at your doorstep. Orchid rethinks the LACK console table and gives it the polish it lacks, tipping her hat to this nailhead console table.

Materials for a DIY nailhead console table:

IKEA LACK console table
Photo: IKEA.com

Step 1: If new prior to assembling or disassemble if an old piece, wrap side panels with fabric of your choice. Depending on width of fabric you will need about 1 ½ yards.

Wrap the sides of the console table with fabric

Step 2: Use small finishing nails to secure fabric at what will be the rear of your table. Remember console tables are usually up against a wall or a sofa.

Step 3: Use a bowl to outline the circle. You can use chalk to draw the circle. Then use a straight edge or ruler to draw the four lines emanating from the circle, the border of the panel the front of the panel.

Mark where the nailheads go

Step 4: Use a tape measure and pencil to make the dots one-inch apart on the circle, and all the lines drawn.

Mark where the nailheads go

Step 5: Place upholstery nails on dots using a hammer. To avoid scratching nail head you may put masking tape on the hammer head.

Place upholstery nails on console table

Step 6: Assemble table

Step 7: Wrap top of table in fabric of your choice. You can staple in place on the underside of table top.

Wrap console table top with fabric

And you’re done!

Nailhead Console Table - IKEA LACK Entryway Table Luxe Upgrade

Nailhead Console Table - IKEA LACK Entryway Table Luxe Upgrade

For step-by-step instructions, you can view the full tutorial on Youtube.

 

See my YouTube channel Orchid Place here.

~ by Orchid

Like projects with nailhead trim? Here are a few more:

- Classy headboard with nailhead trim
- Clayton Grey inspired nailhead side table
- Sassy nailhead ottoman

Great find from source: IKEA Hackers

Comments

Post a Comment

Popular posts from this blog

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...
Post a Comment
Read more

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...
1 comment
Read more

IKEA KALLAX Queen Storage Bed

I built this prior to knowing this website existed, this probably would have saved some contemplation. For difficulty reference, I am no carpenter (electrician actually) and I built it with my right hand in a cast. We bought an old house with original hardwood flooring from the 40s so we were very concerned about damaging it. The casters on a normal bed frame put a lot of pressure on a small surface and we didn’t want it dented or damaged if things started a rockin …. Plus, a 40′s house has virtually no storage as you only needed 3 pairs of pants back then. IKEA material : 3 x KALLAX shelf units (4) 4 x KALLAX drawer kits 8 x KALLAX fabric boxes Non-IKEA material : 4 x 2×4 A grade (saves time) 2 x 2×6 2 x sheets 1/2″ plywood (what ever grade you want) 25ft x iron-on edge trim 100 x 3″ #8 wood screws 20 x 1-1/4″ #8 wood screws satin white paint Tools (I used) : Tape measure Drill w/ 1/8″ bit for piloting holes Impact driver for screws Table saw Miter saw Ass...
Post a Comment
Read more