Skip to main content

Laundry Renovations Perth Before & After

There is so much choice for laundry renovations in 2018 with flat pack setups making beautiful laundry cabinets more and more affordable. If you are looking for advice on your next laundry renovation click here for our 5 best tips for laundry renovation.

All the before and afters below are laundry renovations we have done in Perth, WA. Laundries in Perth range from large to tiny depending on the suburb you’re located in.

Lesmurdie Laundry Renovation  

Extra Tip: These wonderful clients opted for a ceramic sink as they did not like the noise of a steel sink when water hits it.

 

 Leeming Laundry Renovation

 Extra Tip: Textured tiles add a wow factor to an all-white laundry renovation.

 

 Bassendean Laundry Renovation

 Extra Tip: Our client liked there top loader washing machine so opted to leave the space at the end to maximise the rest of the bench space.

 

 Leeming Laundry Renovation

 

 Extra Tip : Matt black tapware has its pros and cons which you can check out here – Click Here

 Murdoch Laundry Renovation

 

 Extra Tip: This laundry contains a pull down ironing board which is great use of space.

 

 Shelley Laundry Renovation

 Extra Tip: Waterfall edges that incorporate the top finish off a laundry top if a feature is what you are trying to make of it.

 Henley Brook Bathroom Renovation

 Extra Tip: Pull out baskets are fantastic for hiding those dirty clothes

 The majority of these laundry renovations we have done in Perth, WA uses what I call the drop down method. Which is the electrical and the plumbing is dropped down below the benchtop to create a nice clean finish. The washing machine taps are a small three-way valve which adds to the clean finish. If you are looking for a laundry renovation in Perth WA, just send us an email atontheballbathrooms@gmail.com  for a same day quote.

It’s important to note that all our advice is general in nature and all bathrooms are unique so always speak to your local qualified tradesman for the best advice. At on the ball bathrooms we love feedback so let us know what you think with a comment below or if you are looking for a bathroom renovation quote and live in Perth, Western Australia contact us on 0419964678.

If you like the article and want to get all the latest updates or see all our before and after show us some love with a like on FACEBOOK ðŸ™‚

For More DIY TIPS For Renovating Your Bathroom Visit:

Our Video Tutorial:   Click Here

High-resolution examples of all projects:  Click Here 

Advertisements

Originally seen on Ontheballbathrooms

Comments

Post a Comment

Popular posts from this blog

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...
Post a Comment
Read more

IKEA KALLAX Queen Storage Bed

I built this prior to knowing this website existed, this probably would have saved some contemplation. For difficulty reference, I am no carpenter (electrician actually) and I built it with my right hand in a cast. We bought an old house with original hardwood flooring from the 40s so we were very concerned about damaging it. The casters on a normal bed frame put a lot of pressure on a small surface and we didn’t want it dented or damaged if things started a rockin …. Plus, a 40′s house has virtually no storage as you only needed 3 pairs of pants back then. IKEA material : 3 x KALLAX shelf units (4) 4 x KALLAX drawer kits 8 x KALLAX fabric boxes Non-IKEA material : 4 x 2×4 A grade (saves time) 2 x 2×6 2 x sheets 1/2″ plywood (what ever grade you want) 25ft x iron-on edge trim 100 x 3″ #8 wood screws 20 x 1-1/4″ #8 wood screws satin white paint Tools (I used) : Tape measure Drill w/ 1/8″ bit for piloting holes Impact driver for screws Table saw Miter saw Ass...
Post a Comment
Read more

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...
1 comment
Read more