Skip to main content

It’s Black or White? Grouting Advice

Grout is often the forgotten element in a renovation, yet it has the power to change a look of an entire room! So what is the difference between dark or light grout? White grout has been popular for years, because of its clean and sterile look when paired with white or light tiles. Because of this, it is commonly placed in bathrooms, kitchens, and laundries. The below bathroom renovation completed in Rivervale, Perth Western Australia used white in the opposite way to bring out the grey in the subway tiles. Often different colored grout is used in subway tiles to show off the tiling but if you only use white as you can see below it looses some of its features.

Dark Grout

 

Lemon-Grass-Interior-Architecture_Vintage-Meets-High-End-Dream-Bath_2.jpg

Bathroom Renovations Leeming 

 

Dark grout can transform a space, making it dramatic and captivating. When using tiles, such as the subway tiles in the above example, they can exaggerate the direction of the space, and create a visual linkage between elements in the room. And since they are so much easier to keep clean, they might just be the perfect solution to your bathroom!

Just remember white grout is a blend and dark grout is a feature we only see the items that stand out so if you want to make the grout of your bathroom the feature go with the darker. If the tiles are not the place you want you and everyone you show it off to seeing, then definitely go the white grout.

 

img_4959.jpg

Bathrooms Willetton

 

We at on the ball bathrooms always try to give you the best advice as possible if you do have any questions about your bathroom renovation or you would like a quote for you bathroom renovation project in Perth we are always happy to help. Please go to our website at www.ontheballbathrooms.com.au


Comments

Popular posts from this blog

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...

Brighten up: A reading lamp the book lover will love

We already had a MAGNARP table lamp in the living room, but we were missing a reading lamp next to our couch. For a standing MAGNARP floor lamp, we didn’t have space. And the available other IKEA lamps were not for our taste. I already saw solutions with FRÄCK , so I decided to make my own wall mounted reading light, fused with MAGNARP. Here goes: IKEA items used: Steps for an IKEA wall mounted reading light: 1. Take apart both sets. 2. Cut the power line of the MAGNARP to be able to pull it out from the pipe. (Cut at both ends of the switch) 3. Cut the pipe. Besides the threaded part which goes inside the bulb socket you I will need approximate 5mm. 4. Cut M10 thread on the pipe’s end, and drill over the thread inside the main plate with M10 as well. 5. Bend the mirror’s fork as seen on the picture. 6. Mark the holes from the bent fork onto the main plate, and drill holes. 7. Make the electric work with a new switch. (I laced it inside the arm before doing so...