Portholes from IKEA Groggy trays

For one porthole you need two Groggy trays and one circular piece of glass or acrylic 345mm (13 ½”) diameter and 3mm thick. A glazier can cut the glass for you and he/she can also heat treat it so that it’s toughened and much safer to use. Toughened glass is much stronger and you won’t cut yourself on it if it breaks. I also used some foam weather strip.

1. Cut the bottom off the trays so that the thickness of what’s left of the two trays plus the glass equals the thickness of your door. For example if the glass is 3mm and the door 44mm you should leave 20mm of the tray (strictly speaking it should be 20.5mm but a 0.5mm gap is OK). I used an angle grinder with a thin blade to cut the trays but you might be able to use a hacksaw or jigsaw with a fine metal blade. Note that the tray is stainless steel so quite tough. File down the sharp edges.

I fixed some self-adhesive foam weather strip along the outside/backside of the cut edge of the trays. I let it stick out a little bit so that when the two trays come together the strips get squeezed against the glass and hold the glass in place. This is especially important to prevent the glass from moving if you’ve got a hollow core door. If you’ve got a solid door you can just put a bead of silicone around the glass/steel corner afterwards to stop the glass from rattling around.

2. Cut a circular hole in the door the same size as the glass. You can use the glass as a template and cut it with a jigsaw. I used a router and a pivot hole in the centre.

3. Fix one tray from one side of the door and then fit the glass and the other tray from the other site. I just glued the trays to the door with silicone but you can also use screws or even straight through bolts for a more nautical look.

We’ve had 9 of these portholes in our home for over 10 years now and they still look great. They let extra light in and let you glimpse what’s in the other room. I don’t use them on bedroom or bathroom doors but you could use frosted glass or mirror glass instead. Please note that the portholes shouldn’t be used in fire doors for safety reasons. I also wouldn’t recommend using them on an outside door unless you fix them very securely and make sure they don’t let rain water into the door.

~ by Jonas Andersson

Great find from Source Ikeahacker

Comments

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...

Brighten up: A reading lamp the book lover will love

We already had a MAGNARP table lamp in the living room, but we were missing a reading lamp next to our couch. For a standing MAGNARP floor lamp, we didn’t have space. And the available other IKEA lamps were not for our taste. I already saw solutions with FRÄCK , so I decided to make my own wall mounted reading light, fused with MAGNARP. Here goes: IKEA items used: Steps for an IKEA wall mounted reading light: 1. Take apart both sets. 2. Cut the power line of the MAGNARP to be able to pull it out from the pipe. (Cut at both ends of the switch) 3. Cut the pipe. Besides the threaded part which goes inside the bulb socket you I will need approximate 5mm. 4. Cut M10 thread on the pipe’s end, and drill over the thread inside the main plate with M10 as well. 5. Bend the mirror’s fork as seen on the picture. 6. Mark the holes from the bent fork onto the main plate, and drill holes. 7. Make the electric work with a new switch. (I laced it inside the arm before doing so...

Joyce Ford Blog

Search This Blog