FJÄLL-BOring turned rustic with wooden pallet top

wooden pallet coffee table DIY

We recently bought the FJÄLLBO coffee table to use as a side table. We liked the metal frame (and the low price), but found the sleek tabletop a bit boring, so we replaced it with wooden planks from an old wooden pallet to achieve a more rustic look.

It’s an easy modification, because the tabletop is attached to the frame with just 6 screws. It didn’t need to be the same size as the old tabletop, because it is attached on top of the metal frame and not inside it – so the new surface is about 1 cm larger than the original on each side.

Take apart the wooden pallet

Join the planks from the wooden pallet together

The hardest part was taking apart the wooden pallet (it took a lot of sawing, hammering and yelling profanities at it). After that, it was just sanding, staining and joining the planks to each other with metal brackets.

wooden pallet coffee table DIY

The wooden crate in the “after” photo is also from IKEA (it’s the large KNAGGLIG). To make the stamp, I printed the logo (reversed) on baking paper and pressed it carefully onto the wood to transfer the ink. The wood absorbs it quickly, and the stain seals it in.

~ by Annie, from Greece

More wooden pallet furniture hacks

A TV unit wrapped with wooden pallet. See how a sad white EXPEDIT shelving unit gets a rustic boost from wood planks.

If you don’t want to go full-blown wood pallet wrap-around, make these adorable drawer inserts instead.

Like more? How about this fancy coat rack with a wood pallet backer?

Or turn the pallets into wooden pallet desk legs with storage.

You could also use the pallet as the desktop fitted with IKEA table legs.

Great find from Source Ikeahacker

Comments

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...

IKEA KALLAX Queen Storage Bed

I built this prior to knowing this website existed, this probably would have saved some contemplation. For difficulty reference, I am no carpenter (electrician actually) and I built it with my right hand in a cast. We bought an old house with original hardwood flooring from the 40s so we were very concerned about damaging it. The casters on a normal bed frame put a lot of pressure on a small surface and we didn’t want it dented or damaged if things started a rockin …. Plus, a 40′s house has virtually no storage as you only needed 3 pairs of pants back then. IKEA material : 3 x KALLAX shelf units (4) 4 x KALLAX drawer kits 8 x KALLAX fabric boxes Non-IKEA material : 4 x 2×4 A grade (saves time) 2 x 2×6 2 x sheets 1/2″ plywood (what ever grade you want) 25ft x iron-on edge trim 100 x 3″ #8 wood screws 20 x 1-1/4″ #8 wood screws satin white paint Tools (I used) : Tape measure Drill w/ 1/8″ bit for piloting holes Impact driver for screws Table saw Miter saw Ass...

Joyce Ford Blog

Search This Blog