Skip to main content

Why You Should Monitor the Humidity Levels in Your Home

Keep the air in your home fresh and healthy. Image: StudioMcGee

Maintaining good air quality in your home is important for the health of your entire family. Either too much or too little humidity can lead to the rise of unhealthy airborne particulates. The EPA recommends keeping relative humidity inside between 30% and 50%. You can check the levels in your home with a digital humidity meter, or hygrometer, which you can find at most hardware stores.

Use exhaust fans in the kitchen when cooking. Image: Decozilla

What happens if you have too much indoor humidity?

You can tell if your indoor air is too humid if you notice:

  • Condensation on windows
  • Water stains on your fabrics or hardwood floors
  • Stale or musty smells in the furniture or carpet
  • Mold in the bathrooms, basement or under the sink

Molds produce allergens, irritants and sometimes potentially toxic substances. Mildew and dust also thrive in humidity.

Open windows whenever you’re cooking or running the dishwasher to alleviate high levels of humidity. Exhaust fans in your kitchen or bathroom can also help. The easiest way to combat high humidity levels is to turn on your central air conditioner. If that’s still not enough, you might need to invest in a dehumidifier to dry the air.

Don’t let your laundry room house extra moisture. Image: DecorPad

Explore the types of dehumidifiers

A dehumidifier’s drying capacity is measured by how many pints of water it can remove from the air within 24 hours. You may only need a small dehumidifier to control the moisture in one room or a small apartment. These are relatively inexpensive.

Most portable, single-room dehumidifiers are self-draining and come with a drain-hose connection. You’ll need to place it in an area where the hose can empty water, such as a laundry room sink. Dehumidifiers with large tubs or drip pans can hold more and will need to be emptied less often. Some dehumidifiers use evaporation technology, so a drain hose isn’t required.

Another option is installing a whole-home dehumidifier. These connect to your existing ductwork and must be professionally installed.

Moisture from the shower can linger in your bathroom. Image: DecorPad

Design tips to reduce humidity in your home

Investing in a dehumidifier is one option, but there are also simple design tricks you can use to help reduce your home’s humidity levels. If you’re in the process of redesigning or redecorating your bathroom, consider using mildew-resistant paint and primer. Even if you only use this paint for the lower parts of the walls, it can cover old mildew stains and prevent new spots from developing. You can also swap bathroom rugs for tile floors to prevent mold and mildew from building up.

Plants help decrease the humidity in the home. Image: Rahult

Add indoor plants to decrease indoor humidity and make your home feel inviting. A peace lily can absorb humidity and toxins through its leaves. Peace lilies only need indirect sunlight to grow, making them ideal house plants. If you’re looking for a plant that can be hung, the English ivy might be the perfect fit. When they’re hung up high, they absorb the humidity rising in the air, and you don’t have to worry about knocking them over.

Keep plants out of reach so they don’t get knocked over by kids or pets. Image: StyleCurator

A few simple updates can make a big difference when it comes to the quality of your indoor air. Which tips will work best in your home?

This post originally from Fresh Home

Comments

Post a Comment

Popular posts from this blog

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...
Post a Comment
Read more

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...
1 comment
Read more

Brighten up: A reading lamp the book lover will love

We already had a MAGNARP table lamp in the living room, but we were missing a reading lamp next to our couch. For a standing MAGNARP floor lamp, we didn’t have space. And the available other IKEA lamps were not for our taste. I already saw solutions with FRÄCK , so I decided to make my own wall mounted reading light, fused with MAGNARP. Here goes: IKEA items used: Steps for an IKEA wall mounted reading light: 1. Take apart both sets. 2. Cut the power line of the MAGNARP to be able to pull it out from the pipe. (Cut at both ends of the switch) 3. Cut the pipe. Besides the threaded part which goes inside the bulb socket you I will need approximate 5mm. 4. Cut M10 thread on the pipe’s end, and drill over the thread inside the main plate with M10 as well. 5. Bend the mirror’s fork as seen on the picture. 6. Mark the holes from the bent fork onto the main plate, and drill holes. 7. Make the electric work with a new switch. (I laced it inside the arm before doing so...
Post a Comment
Read more