Hackers help: Linnmon as BRIMNES bed headboard?

BRIMNES bed headboard

Hi there!

I really like the BRIMNES bed frame but I also do miss that there’s no headboard.

So, I was wondering what to do with the lack of it.

You can find LINNMON table top with the same dimensions as the BRIMNES bed frame. (LINNMON is actually 4 centimeters longer but that’s fine with me)

Linnmon as BRIMNES bed headboard

Has anyone tried to put these two together and make LINNMON stand as a BRIMNES bed headboard?

It could be really easy to do so but I’m not sure if you could drill a hole through BRIMNES that would actually hold LINNMON without falling.

I have a MALM desk that’s honeycomb structured and you CAN’T drill through that at all!

My BRIMNES bed will not be anywhere near the wall and I can’t just screw the headboard into the wall, it needs to be secured to the bed frame.

Maybe I could even use LINNMON connecting hardware for this as well.

LINNMON connecting hardware

~ Ivan

***

Hi Ivan
Good news is it’s possible. And done before. Here’s how fludubu did it.

Fludubu used a cover panel as the headboard, but I’m quite sure you can apply the same to the LINNMON. However, unlike a cover panel the LINNMON is not full particleboard and does contain paper filling (honeycomb structure). Just knock on the table surface to locate sections where there is actual wood to secure your brackets. It’s usually along the sides and corners.

The LINNMON attachment is meant for joining two horizontal planes and would not have enough bite to hold a vertical plane.

Or you can use the BRIMNES headboard.

DIY bed headboard

And add legs to it. Like this. You can cover up the open back with plywood or fabric if you find it unsightly.

DIY bed headboard

As you mentioned that the bed would not be against a wall, if I were you, I would make additional shelves for the open back. And add a piece of wood at the bottom to create more storage. Use iron-on edge banding tape to cover up the exposed edges.

DIY bed headboard

You’ll still need to secure it to the BRIMNES bed to prevent it from falling over. A few screws through the BRIMNES headboard’s legs to the bed and straight brackets on both sides should do the trick.

Good luck!

Happy hacking,

Jules

Product photos: IKEA.com

Great find from Source Ikeahacker

Comments

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...

IKEA KALLAX Queen Storage Bed

I built this prior to knowing this website existed, this probably would have saved some contemplation. For difficulty reference, I am no carpenter (electrician actually) and I built it with my right hand in a cast. We bought an old house with original hardwood flooring from the 40s so we were very concerned about damaging it. The casters on a normal bed frame put a lot of pressure on a small surface and we didn’t want it dented or damaged if things started a rockin …. Plus, a 40′s house has virtually no storage as you only needed 3 pairs of pants back then. IKEA material : 3 x KALLAX shelf units (4) 4 x KALLAX drawer kits 8 x KALLAX fabric boxes Non-IKEA material : 4 x 2×4 A grade (saves time) 2 x 2×6 2 x sheets 1/2″ plywood (what ever grade you want) 25ft x iron-on edge trim 100 x 3″ #8 wood screws 20 x 1-1/4″ #8 wood screws satin white paint Tools (I used) : Tape measure Drill w/ 1/8″ bit for piloting holes Impact driver for screws Table saw Miter saw Ass...

Joyce Ford Blog

Search This Blog