Rimless Toilet Advice – Toilets Perth

What is a rimless toilet you might ask? well, your helper in cleaning is what it is. With no edges, gaps or angles on the inside of the pan’s surface, the rimless design of this toilet means fewer areas for germs to accumulate for a more hygienic bathroom. The toilet we installed in a bathroom renovation in Roleystone used the Caroma Forma BTW Rimless toilet and though the outside is similar to most back to wall toilets the inside is a big difference.

Rimless Toilet Perth

Easy cleaning

As well as being more hygienic, the rimless nature of the toilet also makes it a breeze to clean. Also look for back-to-wall toilets which are installed flush against the wall – this will mean you won’t have to clean the toilet pan awkwardly and try to get into the nooks and crannies.

Price

They are quite expensive in relation to most toilets. You are looking at about $1000 dollars more on some toilets to get this feature so it’s more of a luxury item but something to consider for those clean freaks like me out there. Most of the toilet renovation we do in Perth have space for a toilet like this so keep that in mind when you are doing your next renovation.

Let me know what you think comment below or if you are looking for a quote and live in Perth, Western Australia contact us on 0419964678 or email us at ontheballbathrooms@gmail.com

Originally seen on Ontheballbathrooms

Comments

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...

Brighten up: A reading lamp the book lover will love

We already had a MAGNARP table lamp in the living room, but we were missing a reading lamp next to our couch. For a standing MAGNARP floor lamp, we didn’t have space. And the available other IKEA lamps were not for our taste. I already saw solutions with FRÄCK , so I decided to make my own wall mounted reading light, fused with MAGNARP. Here goes: IKEA items used: Steps for an IKEA wall mounted reading light: 1. Take apart both sets. 2. Cut the power line of the MAGNARP to be able to pull it out from the pipe. (Cut at both ends of the switch) 3. Cut the pipe. Besides the threaded part which goes inside the bulb socket you I will need approximate 5mm. 4. Cut M10 thread on the pipe’s end, and drill over the thread inside the main plate with M10 as well. 5. Bend the mirror’s fork as seen on the picture. 6. Mark the holes from the bent fork onto the main plate, and drill holes. 7. Make the electric work with a new switch. (I laced it inside the arm before doing so...

Joyce Ford Blog

Search This Blog