Skip to main content

As-is item in IKEA turns into a luxe tray table

So I found this IKEA GLADOM tray table in the bargains section in IKEA and all sorts of ideas came into my head. I’ve been looking for a side table for a while but couldn’t seem to find one that I loved. So I thought to myself, if this works, awesome! If not, I didn’t lose too much money!

IKEA items used:
  • GLADOM tray table
Other materials and tools:

Hack instructions for luxe tray table

Make sure your table is clean and remove all stickers.

As-is item in IKEA turns into a luxe tray table

Spray paint the bottom part gold and the tray black. I did it outside. First, I spray painted one side and after a few hours did the second making sure the coats completely dried in between.

As-is item in IKEA turns into a luxe tray table

As-is item in IKEA turns into a luxe tray table

Next, I applied the sticker to the tray. First, wipe your table clean. I started at one end and slowly smoothed it till the other end.

As-is item in IKEA turns into a luxe tray table

The sticker is 30×80 cm, so it is longer and narrower than the table. So I applied it in 3 parts. (I just realized I could have just done it in 2 halves 😅)

Use your knife or cutter to cut around the edges and remove excess.

As-is item in IKEA turns into a luxe tray table

This only took a few hours and the end result looks amazing.

The trickiest part is the sticker. Make sure u smooth it out really well and make sure the edges are all stuck till the end before u cut it.

Hope you like it.

Great find from Source Ikeahacker

Comments

Post a Comment

Popular posts from this blog

Mind the gap: Fit IKEA MALM over a tall baseboard

I forgot one thing when I ordered the MALM dresser : The baseboards in my apartment are very tall and very wide. So, when I installed it, I had a 4 cm gap between the wall and the back of the cabinet which was not aesthetically possible for me. As it is not possible to cut the back of dresser at the bottom to leave room for the tall baseboard, I decided that MALM should be raised. And it was much simpler than I had imagined. You’ll need: A MALM dresser (mine is a 6-drawer chest) Six oak bed legs (I think five would have been enough, but while I was there …) 6 mounting plates A piece of plywood the size of the bottom of the cabinet (I went to the hardware store next door, it cost me less than 5€) Screws White adhesive edging tape How to raise the MALM dresser above a tall baseboard Place the MALM upside down. Fix the plywood onto the underside of the MALM with screws. Predrill holes for the leg screws (if you have the same baseboard problem as me, make sure you measur...
Post a Comment
Read more

How to Document the Home Building Process

Building your home is a unique experience filled with stories you will never forget. There is also important information you need to remember if you build, even after you settle in. Whether it’s for your family or for future renovations, documenting your build is an important part of the process. Keeping track of your documents and making sure your family stay in the loop can help you stay organized and make sure you remember everything about your build. Not sure how to stay on top of all of the details? Document the process with these simple tips so you can always look back on it fondly. Collect this idea Use social media and involve your friends. Image: Kroiss Development Keep friends and family in the loop The home building process is exciting and your friends and family will want to be included. In fact, you’ll probably find that your new home becomes a popular conversation topic. You don’t need to personally keep everyone in the loop. Instead, you can find ways to keep ev...
1 comment
Read more

IKEA KALLAX Queen Storage Bed

I built this prior to knowing this website existed, this probably would have saved some contemplation. For difficulty reference, I am no carpenter (electrician actually) and I built it with my right hand in a cast. We bought an old house with original hardwood flooring from the 40s so we were very concerned about damaging it. The casters on a normal bed frame put a lot of pressure on a small surface and we didn’t want it dented or damaged if things started a rockin …. Plus, a 40′s house has virtually no storage as you only needed 3 pairs of pants back then. IKEA material : 3 x KALLAX shelf units (4) 4 x KALLAX drawer kits 8 x KALLAX fabric boxes Non-IKEA material : 4 x 2×4 A grade (saves time) 2 x 2×6 2 x sheets 1/2″ plywood (what ever grade you want) 25ft x iron-on edge trim 100 x 3″ #8 wood screws 20 x 1-1/4″ #8 wood screws satin white paint Tools (I used) : Tape measure Drill w/ 1/8″ bit for piloting holes Impact driver for screws Table saw Miter saw Ass...
Post a Comment
Read more